Auxiliary Input Socket - PERFECTPRO UBOX 200R Mode D'emploi

Auxiliary input socket

The 3.5mm Aux In socket is to connect audio source like
MP3 player or CD walkman and listen the audio program
via radio speaker.
1. Connect a stereo or mono audio source (like CD
walkman or MP3 player) to the Aux In socket, which is
located on the side, behind the rubber cover.
2. Press the Power On/Off button to switch on your radio.
3. Repeatedly press and release the Source button until
"AUX IN" is shown on the display.
4. Play the file in the CD walkman or MP3 player.
5. Adjust the volume control to the required level.
Note:
Make sure the rubber cover of the Aux In socket is closed
well after use to prevent moist and dirt from entering the
radio.
Never use the Aux In socket in rainy or moist conditions
to prevent moist from entering the radio. Keep the rubber
cover always closed under these conditions.
23
WARRANTY
This radio has a 2 year limited warranty.
WARNING ! Warranty becomes void once the radio
cabinet has been opened or any modifications or
alterations to the radio have been made !
The terms of the warranty of this radio do not cover the
following:
- Damage caused by misuse, abuse, neglect, alterations,
accidents or unauthorized repair.
- Normal wear and tear.
- Batteries
Never open the device casing. The manufacturer will not
accept any liability for damage resulting from improper
handling. The type plate is located on the back of the
device.