Auxiliary Input Socket - PERFECTPRO DABPRO Mode D'emploi

Auxiliary input socket

The 3.5mm Aux In socket is to connect audio source like MP3 player or CD walkman and listen the
audio program via radio speaker.
1. Connect a stereo or mono audio source (like CD walkman or MP3 player) to the Aux In socket,
which is located on the rear of the radio, behind the rubber cover.
2. Press the Source button to select Auxiliary Input mode. The display will show "AUX IN".
3. Play the file in the CD walkman or MP3 player.
4. Adjust the volume control to the required level.
Note: Make sure the rubber cover of the Aux In socket is closed well after use to prevent moist and dirt
from entering the radio.
Never use the Aux In socket in rainy or moist conditions to prevent moist from entering the radio. Keep
the rubber cover always closed under these conditions.
SAFETY AND COURTESY NOTE: To prevent possible hearing damage, do not listen at high volume
levels for long periods or put your ears too close to the speaker.
Please use the volume level responsibly with respectable consideration of the situation and other
people or animals in the vicinity.
WARRANTY
This radio has a 2 year limited warranty.
WARNING! Warranty becomes void once the radio cabinet has been opened or any
modifications or alterations to the radio have been made!
The terms of the warranty of this radio do not cover the following:
- Damage caused by misuse, abuse, neglect, alterations, accidents or unauthorized repair.
- Normal wear and tear.
- Batteries.
Never open the device casing. The manufacturer will not accept any liability for damage resulting from
improper handling. The type plate is located on the back of the device.
18