PERFECTPRO UBOX 200R Mode D'emploi page 16

Listening to music via Bluetooth streaming
You need to pair your Bluetooth device with your UBOX
200R before you can auto-link to play/stream Bluetooth
music through your UBOX 200R. Pairing creates a 'bond'
so the two devices can recognize each other.
Pairing and playing your Bluetooth device for the first
time
1. Press the Power On/Off button to switch on your radio
and press the Source button to select Bluetooth
function. The "PAIRING" will show on the display. The
Bluetooth status indicator (
fast blue to show the radio is discoverable.
2. Activate Bluetooth on your device according to the
device's user manual to link to the radio. Locate the
Bluetooth device list and select the device named
'UBOX 200R' (With some Smartphone's that are
equipped with earlier versions than BT2.1 Bluetooth
device, you may need to input the pass code "0000").
3. Once connected, there will be a confirmation tone
sound and the Bluetooth status indicator (
a solid blue. You can simply select and play any music
from your source device. The volume control can be
adjusted from your source device, or directly from the
radio. To disconnect your Bluetooth device, Press and
hold the Bluetooth pairing button for 2-3 seconds. To
reconnect to your Bluetooth device, press and release
this button again.
15
) on the panel will flash a
) will turn
4. Use the controls on your Bluetooth-enabled device or
on the radio to play/pause and navigate tracks.
(Note: To disable Bluetooth status indicator (
please refer to the later section "Bluetooth status
indicator On/Off".)
Note:
1) If 2 Bluetooth devices are pairing for the first time, both
will search for your radio, it will show its availability on
both devices. However, if one device links with this unit
first, then the other Bluetooth device will not find it on
the list.
2) If you take your source device out of range, the
connection will be temporarily disconnected to your
radio. Your radio will automatically reconnect if the
source device is brought back in range. Be aware that
during the period of disconnection, no other Bluetooth
device can pair or link with your radio.
3) If 'UBOX 200R' shows in your Bluetooth device list but
your device cannot connect with it, please delete the
item from your list and pair the device with the radio
again following the steps described previously.
),