Publicité
permanently in conjunction
with a travel adapter.
Only use the product in dry
indoor areas and protect it
from moisture.
The product complies with
protection class II. It fea-
tures reinforced insulation and
thus requires no protective
grounding.
PRODUCT DESCRIPTION (SEE PAGE 2)
A: AA/AAA charging compartments
B: 9V charging compartment
C: Discharge button
D: LC display
OVERVIEW OF FUNCTIONS
Quick charger for 1-4 NiMH batteries of the sizes Micro AAA /
Mignon AA or 1-2x AAA/AA and one 9V E-Block NiMH
Microprocessor controlled charging with single cell monitoring
Automatic start of charging and charging current adjustment
after insertion of the batteries with correct polarity
Status display by a 4-segment LCD symbol per charging bay
Defective battery detection
Worldwide usable (100-240V AC)
For round cells:
Discharge function selectable
Intelligent "PERFECT 7 CHARGING" function (SEE PAGE 2):
1.
Capacity quick test: Residual capacity is determined
before charging begins and displayed for 5 seconds
2.
Gentle pre-charging: Weak or deeply discharged battery
is pre-charged with lower current if necessary
3.
Battery analysis: Battery behavior is analyzed and
evaluated to determine whether it is still reliably usable
or defective
4.
Quick charge: Battery is charged at maximum current
5.
IQ switch-off: Intelligent monitoring of the battery for
reliable charging and multiple protection against
overcharging
Deutsch |
English
| Français | Español | Português | Svenska
12
Italiano | Nederlands | Dansk | Suomi | Norsk
6.
Top-off charge: Ensures that the battery is gently
charged to 100% capacity
7.
Trickle charge: Battery is kept in a fully charged state by
means of charging pulses
For 9V E-Block:
Capacity quick test, Charging, Time-controlled cut-off, trickle
charging
OPERATION
NORMAL CHARGING PROCESS
Connect the charger to an electrical outlet.
Insert the battery into the charging slot with the correct
polarity (see engraving in the charging slot).
The product displays the charge status of the battery for
5 seconds and then automatically starts the charging
process.
As soon as a battery is fully charged, the charger switches
to trickle charge.
You can now remove the fully charged battery.
After all batteries have been removed, disconnect the
product from the power supply.
*1 Discharge function only for round cells
NOTE: It is not necessary to discharge batteries before each
charge. We recommend pre-discharging after approx. 10
charging processes to prevent the lazy-battery effect, which
reduces the discharge voltage of batteries. This effect occurs
if NiMH batteries are often only partially discharged and then
recharged.
Deutsch |
English
| Français | Español | Português | Svenska
Italiano | Nederlands | Dansk | Suomi | Norsk
CHARGING PROCESS WITH
PRE-DISCHARGE *1
Press the Discharge button.
Pre-discharge starts for all
inserted round cells
After all round cells have
been discharged, the
charging process starts
automatically.
13
Publicité
