Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SITE PREPARATION
INSTALLATION REQUIREMENTS
PLAN THE INSTALLATION
IMPORTANT:
Install the handles on the panels prior to panel
■
installation. Follow the instructions received with
handle kit to install the handles.
Plan your installation using these instructions
■
in conjunction with the Installation Instructions
provided with the refrigerator. Modifications must
be made to the refrigerator to accommodate the
Armoire-style door panels.
Required parts
One of the following built-in refrigerator
models:
42" Side-by-Side: JS42NXFXDE
48" Side-by-Side: JS48NXFXDE
36" Bottom Mount: JB36NXFXLE,
JB36NXFXRE
36" French Door Bottom Mount:
JF36NXFXDE
42" French Door Bottom Mount:
JF42NXFXDE
Accessory Armoire-Style Door Panel Kit
which includes (Grille Assembly and Grille
Bracket Assembly)
Custom Panels
NOTE: The required thickness for all panels
is 3/4" (1.91 cm).
OPENING REQUIREMENTS
IMPORTANT:
The width of the opening, from side to side,
must be as specified for your model, for
at least 3" (7.62 cm) back from the face of
the cabinet. If your opening does not meet
this requirement, you will need to make
modifications.
The depth of the opening from the front
of the cabinet to the back wall must be
25" (63.5 cm) minimum to achieve a flush
installation.
CABINET AND PANEL INSTALLATION
OPTIONS
Cabinet Depth - 25" (63.5 cm)
Grille Bracket - Top View
A
B
A. Refrigerator door
D. Grille bracket
B. Armoire-style door panel
E. Adjacent cabinet
C. Side trim
Grille Bracket - Side View
D
A. Refrigerator door
C. Side trim
B. Armoire-style door panel
D. Grille bracket
SITE PREPARATION | 7
D
C
E
C
B
A
Publicité
Chapitres
Table des Matières
