Trilux 3331 G2 +HFS Série Mode D'emploi Et Instructions D'installation page 27

Group behaviour (operating modes) (DALI version only)
swarm/
(factory setting: all)
all
swarm = with movement, only the subgroups respond in which the
movement is detected plus the adjacent subgroups.
all = the complete group with all subgroups responds with movement.
Remote Group Setting (DALI version only)
send
The last modified parameter is sent to the group.
last
The complete setting block/parameter block is sent to the group.
send
all
Reset
reset
All settings are reset to factory settings. If all subgroups in the com-
plete group are reset to factory settings, the "send all" button (see
Remote Group Setting) must be pressed after resetting the master
luminaire.
SENS
Sensor sensitivity
With erroneous switching caused by moving objects, the sensitivity of
the sensor can be reduced in (10) steps with the (-) button.
N
Button (N) sets the standard sensitivity.
_
27
E