Publicité
Booster – preset stimulation
This function enables you to use different preset stimulation level than it is set on the button of
the main stimulation impulse
. Function booster can also simulate a function of the
continuous impulse or help to solve crisis situations. Stimulation is emitted as long as the booster
button is pressed, but maximum 8 seconds.
On the booster button can be set any intensity of the stimulation (00–30) different to what you
have selected for main stimulation button. The number on the display shows main stimulation
button setting. Checking intensity of the booster button can be made only when the booster
button is pressed. Beware: Do not check the intensity, when the dog wears the collar!
Booster button setting:
Press continuously button for the choice of the dog 1 or 2 (button
for receiver 1 or
for
receiver 2 according to required pairing), until you see on LCD symbol 1/2 flashing. With the
buttons
choose requiered intensity of the stimulation impulse on the booster button.
Confirm the choice by short button press
/
.
Control buttons
These buttons are used for prompt setting of the stimulation intensity in the receiving collar. It is
possible to set up 30 levels, which are indicated by numbers 1–30 on the LCD. When the
stimulation level setting is changed, the LCD will lit up for 3 seconds.
Control buttons
These buttons are used for selection of the dog 1 or 2. You can set different stimulation level for
each dog, which will stay saved when switched over to another dog.
External remote control – one touch
The external remote is very helpful addition of the transmitters d-control 610, 1010, 1610.
d-control models equipped with this accessory are suitable especially for professional dog sport
and hunting training. They may be also used while jogging, cycling, horse riding etc.
36
Publicité
