Publicité
Transmitter preparation
Battery insertion and replacement
1. Screw out screw from the battery cover using a cross-head screwdriver and carefully remove
the lid.
2. Insert two alkaline AA batteries into the battery compartment with a correct polarity (according
to the polarity indicated with the "+" symbol in the battery compartment). Wrong polarity may
damage the unit.
3. Put the battery cover back and screw in the screw adequately. Checking the transmitter battery
status.
The battery power indicator on LCD shows the battery status:
– fully charged battery
– medium charged battery
– flat battery
If the battery is flat, insert new AA alkaline batteries into the battery compartment. Check that
the transmitter is working corectly.
Switching ON/OFF
To turn on: press down for 1 second the ON/OFF button
by backlit LCD.
To turn off: press down for 1 second the ON/OFF button
by extinction of the LCD.
, turning ON is indicated
, turning OFF is indicated
29
Publicité
