Bosch UniversalChainPole 18 Notice Originale page 27

(24) Guide fin for chain bar
(25) Fixing screws
Technical Data
Cordless pole pruner
Article number
Chain speed (no-load)
Chain bar length
Max diameter of cut
Saw chain type
Drive link thickness
Amount of drive links
Oil reservoir capacity
Automatic chain oiler
Height adjustment
Pivoting head, 9 positions
Weight according to EPTA‑Procedure 01:2014
Serial number
Recommended ambient temperature during charging
Permitted ambient temperature during operation
Battery type
A)
Limited performance at temperatures < 0 °C
Noise/Vibration Information
Noise emission values determined according to EN 62841-1
Typically the A-weighted noise levels of the product are:
– Sound pressure level
– Uncertainty K
Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 62841-1
– Vibration emission value a
h
– Uncertainty K
The declared vibration total value(s) and the declared noise
emission value(s) have been measured in accordance with a
standard test method and may be used for comparing one
machine with another.
The declared vibration total value(s) and the declared noise
emission value(s) may also be used in a preliminary assess-
ment of exposure.
The vibration and noise emissions during actual use of the
machine can differ from the declared total value depending
on the ways in which the machine is used; and of the need to
identify safety measures to protect the operator that are
based on an estimation of exposure in the actual conditions
of use (taking account of all parts of the operating cycle such
Bosch Power Tools
a)
(26) Charger
a) This accessory is not part of the standard scope of delivery.
A)
and storage
dB(A)
dB
2
m/s
2
m/s
as the times when the machine is switched off and when it is
running idle in addition to the trigger time).
Starting Operation
For Your Safety
Before any work on the machine itself (e. g. mainten-
u
ance, tool change, etc.) as well as during transport
and storage, remove the battery from the power tool.
There is danger of injury when unintentionally actuating
the On/Off switch with the locking button.
English | 27
UniversalChainPole 18
3 600 HB3 1..
m/s
cm
cm
3/8"–90PX033E
mm
ml
m
°
kg
See serial number (type plate) on
the machine
°C +10... +35
°C -20... +50
PBA 18V...W-.
1.5 Ah, 2.0 Ah, 2.5 Ah, 3.0 Ah, 4.0
Ah, 5.0 Ah, 6.0 Ah
3 600 HB3 1..
F 016 L94 806 | (17.09.2024)
4.0
20
14.5
1.1
33
60
●
2.1–2.6
120
3.8
78
4
1.0
1.5