Publicité
Checking the network
If you wish to connect the radio with your home network, confirm
the question displayed by pressing Yes. If this setting is selected, the
radio will check for available networks each time it is switched on.
Network configuration
To connect your radio with the network, confirm the question
displayed by pressing Yes. If you do not wish ot connect the radio
with a network, you can bypass this menu item by selecting No.
Network selection
Select the type of connection to be used to connect the radio with a
network. If you have connected a LAN cable, select Cable Network,
and if you wish to establish a wi-fi connection (W-LAN) select
Wireless Network.
When selecting a connection via W-LAN (wireless network) all
available networks will be displayed. Select the network with which
the connection is to be established
Enter the W-LAN key. Use the arrow keys B
continue by pressing the right arrow key.
Confirm the entry by pressing ENTER B
OPERATION
Press the Menu key A
on the radio or on the remote control to go
3
to the main menu of the radio. The radio will automatically close the
menu after 10 seconds, and will revert to the radio mode previously
selected, a display in the bottom right-hand corner will show the
seconds, counting backwards.
You can navigate around the menu using the arrow keys B
The main menu of the radio consists of the following menu items:
Settings
Local Station
Internet Radio
Media Center
You can select the individual menu items using the arrow keys B
Confirm your selection by pressing the ENTER key B
Configuration
Press the Menu key B
on the radio or on the remote control, and
q
use the arrow keys B
to select Settings.
r
You can make individual settings for the radio under this menu item.
Mode
Select the operating mode of the radio.
If you select the mode Radio Alarm, the radio will switch to a digital
clock on the display. Go to the menu item ALARM to configure the
radio as a radio alarm.
My MediaU Management
Here you can activate or deactivate the MediaU Management
function.
to select a symbol,
r
.
e
.
r
FM
DAB
Information Center
Audio
.
r
.
e
The MediaU Management function allows you to save an individual
station list, and to play these stations.
To set up and activate your station list, you will require a login on the
following Internet page: http://www.mediayou.net/
If your log-in is successful, you can register your radio.
To do this, please enter the MAC address of the radio as a serial
number. The MAC address of the radio can be found under the item
Information Center.
Whenever you have updated the web page, on which you can
manage and update your personal radio stations, please navigate
your radio to My MediaU Management to synchronize the changes.
Network
Here you can configure your network settings.
Use the arrow keys B
r
confirm by pressing ENTER B
The network will be configured as described under Point Checking
the network.
Date Time
Here you can set the time and date.
The radio is set to automatic time setting at the factory. When the
radio is connected to the Internet via a network, the time and date
will be synchronized automatically. In this case it is not necessary to
set the time.
Alarm
The radio can be used as a radio alarm.
This menu item allows you to set 2 wake-up times if desired. Also,
you can set whether the alarm is to go off at the set time with a
note, a melody, an Internet radio station, a DAB+ radio station or an
FM station.
When you have entered the alarm time, activate the radio alarm
function in the menu.
To stop the alarm, press the Enter key B
or key 7 A
on the radio.
7
To do this, go to Settings and select the menu item Mode, and switch
the operating mode to radio alarm here (Chapter Mode).
Timer
The timer allows you to set a time at the end of which the radio will
sound an alarm.
To do this, use the arrow keys B
seconds. Pressing the key repeatedly will increase or decrease the
time in one-second steps, hold the right arrow key or left arrow key
down for longer to scan forward or backward through time.
Confirm your entry by pressing Enter B
Language
Here you can set the menu language of the radio.
Dimmer
The dimmer function allows you to adjust the brightness of the dislay.
The radio is set to the highest level of brightness at the factory. Use
this menu item to adjust the brightness individually.
Display
Here you can change the multi-colour display to black and white, if
required.
Energy management
Here you can determine whether resp. after what interval the radio
should switch automatically from the operating to stand-by mode.
You can select from 5, 15 and 30 minutes.
If the radio does not switch off automatically, go to the line Switch
Off, and confirm the command with Enter B
7
to select the desired menu item, and
.
e
on the remote control,
e
to enter the time in minutes and
r
.
e
.
e
DABMAN i200
Publicité
