voestalpine Bohler Welding URANOS NX 2700 TLH Mode D'emploi page 39

10. TECHNICAL SPECIFICATIONS
Electrical characteristics
Power supply voltage U1 (50/60 Hz)
Zmax (@PCC) *
Slow blow line fuse
Communication bus
Maximum input power
Maximum input power
Power consumption in standby
Power factor (PF)
Efficiency (μ)
Cos
Max. input current I1max
Effective current I1eff
Adjustment range
Open circuit voltage
Peak voltage Up
* This equipment complies with EN / IEC 61000-3-11.
* This equipment conforms to the requirements of EN / IEC 61000-3-12 provided maximum permissible mains impedance at
the point of interface with the public grid (point of common coupling, PCC) is below or equal to the declared Zmax value. If it is
connected to a public low voltage system, it is the responsibility of the installer or user of the equipment to ensure, by
consultation with the distribution network operator if necessary, that the equipment may be connected.
Duty factor
Duty factor (40°C)
(X=35%)
(X=60%)
(X=100%)
Duty factor (25°C)
(X=80%)
(X=100%)
Physical characteristics
IP Protection rating
Insulation class
Dimensions (lxdxh)
Weight
Power supply cable section
Length of power supply cable
Manufacturing Standards
TECHNICAL SPECIFICATIONS
3x230 (±15%)
53
25
DIGITAL
10.5
10.1
51
0.96
83
0.99
30.8
18
3-270
80
10.1
3x230V
270
230
180
270
240
IP23S
H
500x190x400
18.8
4x4
5
EN IEC 60974-1/A1:2019
EN IEC 60974-3:2019
EN 60974-10/A1:2015
39
U.M.
3x400 (±15%) Vac
53
16 A
DIGITAL
10.5 kVA
10.1 kW
51 W
0.96
83 %
0.99
15.3 A
9 A
3-270 A
80 Vdc
10.1 kV
3x400V U.M.
270 A
230 A
180 A
270 A
240 A
U.M.
mm
Kg
mm²
m
EN