voestalpine Bohler Welding URANOS NX 2700 TLH Mode D'emploi page 16

EQUIPMENT USE
EN
1
Power supply LED
Indicates that the equipment is connected to the mains and is on.
2
General alarm LED
Indicates the possible intervention of protection devices such as the temperature protection.
3
Power on LED
Indicates the presence of voltage on the equipment outlet connections.
4
Signal cable CAN-BUS input (RC, RI...)
4. EQUIPMENT USE
4.1 Starting Screen
When switched on, the system performs a series of self-tests to verify its own correct functioning and that of the devices
connected to it. At this stage the gas test is also carried out to check the proper connection to the gas supply system.
4.2 Main Screen
4.3 MMA process main screen
1
2
4
3
1 2 3
1 Measurements
2 Welding parameters
Functions
3
16