voestalpine Bohler Welding URANOS NX 2700 TLH Mode D'emploi page 14

SYSTEM PRESENTATION
EN
Connect the gas hose from the cylinder to the rear gas connection. Adjust the gas flow from 5 to 15 l/min.
3. SYSTEM PRESENTATION
3.1 Rear panel
2
3.2 Sockets panel
2
3
1 4
3
1
4
Gas tube
1
Gas union-connection
2
Power supply cable
1
Connects the system to the mains.
Off/On switch
2
Turns on electric power.
It has two positions, "O" off, and "I" on.
3
Signal cable CAN-BUS input (RC, RI...)
4
Positive power socket (+)
1
Process MMA:
Process TIG:
Negative power socket (-)
2
Process MMA:
Process TIG:
3
Signal cable input (TIG torch)
4
14
Connection electrode torch
Connection earth cable
Connection earth cable
Torch connection