Publicité
Page 8 of 21
Picture 33
Picture 35
Picture 37
FITTING INSTRUCTIONS
Before removing engine bolts, ensure the bike is upright and supported by a suitable engine
stand or jack placed under the sump of the motorbike to support the partial weight of the
engine, this will prevent the engine from moving during fitting. DO NOT REMOVE MORE THAN
1 ENGINE BOLT AT ANY TIME.
PREPARATION:
Place a suitable jack beneath the engine in a central position using a piece of wood between the
•
jack and engine.
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
R&G Racing
www.rg-racing.com
CP0444
Picture 34
Picture 36
Picture 38
Email:
info@rg-racing.com
Publicité
