Publicité
Step 3:
Connect the two wire terminals as shown in fig (# 7), place the spreadsheet assembly (# 6)
on the main frame assembly (# 1), and lock them with a I-shaped knob M5 * 15 (# 5).
# 5
M5*15 1PC
Step 4:
As shown on the left, buckle the two connection covers (# 13) onto the main frame assembly
(# 1) from top to bottom, and then push it slightly to the direction of the slide rail assembly (#
2); # 8) Rotate counter clockwise and pull up the knob to disengage the cushion assembly (#
3) from the slide rail assembly (# 2). So the cushion assembly (# 3) can slide smoothly
forward and backward.
# 13 2PCS
Assembly is finished！
6
Publicité
