Miele PDR 910 EL Plan D'installation page 11

The separately available set consists of the communication box and fasteners for installa-
tion on the machine or on the wall.
XKM 3200 WL PLT
The optional Miele communication module can be used to establish a data connection be-
tween a Miele Professional machine and a data processor in accordance with the Ethernet
or WiFi standard.
This communication module fits into the communication slot which is a standard feature on
all machines. The communication module offers the option of intelligent app-based com-
munication with external systems. In addition, it can display detailed machine and program
status information.
This module forms the basis for wired communication with Miele MOVE.
It is not possible to integrate the machine into the "Miele@home" app for domestic in-
stallations.
The communication module is intended exclusively for commercial use and is supplied
with voltage directly via the Miele Professional machine. No additional power connection
is required. The Ethernet interface provided via the communication module complies with
SELV (safety extra low voltage) requirements in accordance with EN 60950. Connected
external machines must also comply with SELV.
Base
The tumble dryer can be installed on a base (open or box base, available as an optional
Miele accessory).
Elevating the tumble dryer gives a better ergonomic working position when loading or un-
loading.
 Risk of injury and damage due to missing fastenings.
When installing on a base, an unsecured tumble dryer can slip and fall off the base.
If the tumble dryer is installed on an existing on-site base, it must be secured.
The base must be secured to the floor.
en - Installation notes
11