Miele PDR 910 EL Plan D'installation page 10

Rückstauklappe installieren!
en - Installation notes
,
Bei Nichtbeachten können
durch zurückfließendes Kondens-
If 3–5 tumble dryers are installed on one shared exhaust air duct, the pipe diameter D must be in-
wasser die Trockner beschädigt
creased.
und deren elektrische Sicherheit be-
Number of tumble dryers
einträchtigt werden!
3
4–5
Floor anchoring
Miele generally recommends securing both of the tumble dryer's front screw feet to the
floor with tensioning strips.
In the following cases, the tumble dryer must be secured to the floor with tensioning strips:
- when installing on a base
- on an offshore installation
Optional accessories
Only use genuine Miele spare parts and accessories with this machine.
Using parts or accessories from other manufacturers may void the warranty, and Miele
cannot accept liability.
Communication box
The optional communication box allows external hardware from Miele and other suppliers
to be connected to the Miele Professional machine. External hardware includes e.g., peak-
load systems, pressure sensors, or an external vent flap.
The communication box is supplied with voltage by the Miele Professional machine.
10
Factor for increasing the pipe diameters from Ta-
ble II
1.25
1.5
47