Publicité
Assembly
Open Shipping Crate
1. Set the shipping Crate on a solid, flat surface.
2. Carefully cut the shipping bands and remove lid of shipping crate.
3. Using two people to lift all parts out of the box
4. Locate all hardware before beginning assembly.
Step 1
Wheel Assembly
1. Attach the wheels (#4) to the
wheel stand secure using flat
washer Ø20 (#6), thin hex slotted
nut M20x1.5 (#8) and cotter pin
Ø4x36 (#5). Install the axle cap
(#7) on the end using rubber
hammer.
Step 2:
Attach Tow bar and Support Leg
1. Attach the tow bar (#2) to the
hydraulic reservoir using hex bolt
M12x35 (#35), flat washer Ø12
(#20) and hex lock nut M12 (#25).
2. Attach fenders (#89 & #90) to
the hydraulic reservoir using hex
bolt M8x25 (#69), flat washer Ø8
(#37), lock washer Ø8 (#57) and
hex lock nut M8 (#38). Attach
rubber washer (#131) between
fender and hydraulic reservoir.
25
Publicité
