Publicité
Original-Bedienungsanleitung FUXTEC 20V Akku-Heckenschere FX-E1HS20_de_en_fr_ita_rev3
Switching the device on/off
Insert the battery into the slot provided. Then push the safety button (Figure 2, item 1) in at the side,
only then you can operate the on/off switch (Figure 2, item 2). Then press and hold the safety lever
on the front handle (Figure 2, item 3). The device will now start up. If you release the on/off switch or
the safety lever on the front handle, the device stops working. Warning: The cutting tool may still run
slightly afterwards.
Operating notes
- Hold the device with both hands by the handles provided.
- The hedge trimmer can be made to move forwards and backwards with its double-sided cutting
blades or with an oscillating movement from one side to the other.
- First cut the sides of the hedge and then the top of the hedge.
- Cut the hedge from bottom to top.
- Hold the hedge trimmer at an angle of 5-10° to the hedge to make a straight cut.
- Cut the hedge into a trapezoidal shape. This prevents the lower part of the hedge from being
discoloured by lack of light.
- Cut the upper edges of the hedge somewhat round.
28
Publicité
