Publicité
Original-Bedienungsanleitung FUXTEC 20V Akku-Heckenschere FX-E1HS20_de_en_fr_ita_rev3
- Cut in several stages if heavy cutting is required.
- If necessary, tension a guide line if you want to trim the hedge evenly.
- Trim the young hedge plants to the desired shape. The main shoot should not be damaged until the
hedge has reached the desired height. All other shoots can be cut in half.
- Dispose of the clippings in a professional and environmentally friendly manner.
- Pruning times:
•
Deciduous hedges: June + October
•
Needle-hedging: April and August
•
fast-growing hedges (e.g. conifers): from May onwards approx. every 6 weeks
- Warning: Watch out for breeding birds in the hedge. Do not cut or trim until after breeding, or leave
out this area of the hedge.
Maintenance and care
Warning: before carrying out any work on the power tool, remove the battery from the device.
- Clean the hedge trimmer with a dry cloth after each use or with a brush if it is very dirty.
- Never spray the hedge trimmer with water.
- Keep the battery and device contacts clean and dust-free.
- Clean the cutting blade after each use. Remove impurities, leaf debris, etc.
- Spray the cutting blade with maintenance oil after use to ensure a long life for the hedge trimmer. If
possible, use environmentally friendly lubricants, e.g. maintenance sprays.
- Place the hedge trimmer on its side for oiling and apply a thin film of oil to the cutting blade.
Sharp cutting blades ➔ Wear protective gloves!
Do not use water or liquid cleaning agents.
29
Publicité
