Publicité
Original-Bedienungsanleitung FUXTEC 20V Akku-Heckenschere FX-E1HS20_de_en_fr_ita_rev3
- Keep power tools away from rain or wet conditions. Water entering a power tool increases the risk
of electric shock.
- Do not use the cord to carry or hang the power tool or to unplug the power tool from the wall
outlet. Keep the cord away from heat, oil, sharp edges or moving parts. Damaged or tangled cables
increase the risk of electric shock.
- If you use a power tool outdoors, only use extension cords that are suitable for outdoor use. Using
an outdoor power tool suitable extension cable reduces the risk of electric shock.
Personal safety
- Be alert, pay attention to what you are doing, and use common sense when working with a power
tool. Do not use a power tool if you are tired or under the influence of drugs, alcohol or medication.
A moment of carelessness while using a power tool can cause serious injury.
- Wear personal protective equipment and always wear safety glasses. Wearing personal protective
equipment such as a dust mask, non-slip safety shoes, hard hat or ear protection, ever after type and
use of the power tool, reduces the risk of injury.
- Avoid unintentional start-up. Make sure that the power tool is switched off before connecting it to
the power supply and/or battery, picking it up or carrying it. If you lift your finger while carrying the
power tool on the switch or connect the device to the power supply when switched on, this can lead
to accidents.
- Remove adjustment tools or wrenches before turning on the power tool. A tool or wrench that is in
a rotating part of the unit may cause injury.
- Avoid abnormal posture. Maintain a safe standing position and balance at all times. This will help
you control the power tool in unexpected situations.
- Wear suitable clothing. Do not wear loose clothing or jewellery. Keep hair, clothing and gloves away
from moving parts. Loose clothing, jewellery or long hair can be caught by moving parts.
Use and handling of the power tool
- Do not overload the device. Be sure to use the designated power tool for your work. With the right
power tool, you will work better and safer in the specified power range.
- Do not use a power tool whose switch is defective. A power tool that cannot be switched on or off
is dangerous and must be repaired.
- Unplug the power cord and/or remove the battery before making adjustments to the device,
changing accessories or putting the device away. This precaution prevents the power tool from
starting accidentally.
20
Publicité
