Using The Radio For The First Time - PERFECTPRO ROCKBOX Manuel De L'utilisateur

USING THE RADIO FOR THE FIRST TIME

1. Place the radio on a flat surface.
2. Carefully extend the antenna located on the top of the radio. Adjust the antenna so
it is vertically extending above the radio.
3. Plugging the AC power cord into the AC socket. The radio will start up and the
display will show "WELCOME" for a few seconds. Then the radio will automatically
perform an auto scan of the Band III DAB channels and the FM band, the display
will show "ATS setting".
4. When the scan is completed, the 10 strongest FM stations will be stored as presets.
The radio will switch to standby with the updated clock and date showing on the
display.
5. If no signals are found, the clock will not be updated. It may be necessary to
relocate the radio to a position giving better reception.
GB
8