Télécharger Imprimer la page

Columbus AKS 80 Mode D'emploi page 17

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Vacuum sweeper
AKS 80|BM 108
"columbus" WILL NOT TAKE RESPONSABILITY FOR DAMAGES TO PROPERTIES OR INJURIES TO PEOPLE THAT MAY OCCUR BY NOT FOLLOWING
ALL THE EQUIPEMENT THAT WILL BE NECESSARY FOR THE SAFETY OF THE EMPLOYEES (GLOVES, MASKS, GLASSES, WHITE LENSES, UTENSILS)
KEEP THE MANUAL WITH YOU AND IN CASE YOU LOSE THE MANUAL PLEASE ASK FOR ANOTHER COPY FROM YOUR RESELLER.
"columbus" RESERVES THE RIGHT TO CHANGE THE SPECIFICATIONS OF THE MACHINES WITHOUT NOTICE AND WILL NOT OFFER UPDATES FOR
"columbus" is pleased to make you the new owner of a AKS 80|BM 108 series sweeper.
By observing the instructions provided below, we are certain you will be able to fully appreciate the operating possibilities offered
by AKS 80|BM 108.
This instructions manual is supplied to instruct and define the purposes and intentions that the machine was designed for and its
safe use, as clearly as possible.
You will also find a list of all of those minor operations required to keep AKS 80|BM 108 in good running order and safe.
Procedures that can easily be carried out by anyone.
Always seek the assistance of specialised staff for unscheduled maintenance.
You will find information on hazards and residual risks, i.e. all of those risks that cannot be eliminated, plus adequate information
on allowed and forbidden uses; instructions on how to commission AKS 80|BM 108, technical instructions and allowed
performance; instructions on how to operate AKS 80|BM 108 and its maintenance; instructions on how to decommission the
machine, and dismantle or demolish it.
Once the external packaging has been removed, take the machine off of its pallet; this operation can be carried out in two ways:
3) Use a three-pronged hook with a suitable capacity for the weight of the machine (provided on the CE plate). Lift the motor
hood until it is resting on the steering wheel, all the way open. Screw the eye-bolt all the way into the threaded hole on the
platform by first of all taking the casing off of the motor (Part. 7 Fig. 4). Hook all of
BEFORE USING THE MACHINE PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY
THE RULES IN THIS MANUAL OR BY AN IRREGULAR USAGE OF THE MACHINE.
WILL NOT BE PROVIDED BY "columbus".
PLEASE, FOLLOW THE CONTENTS OF THIS MANUAL.
ALL "columbus" MACHINES ARE CE CONFORM AND CARRY THIS LABEL:
CHAP. 2 – PURPOSES / INTENDED USE
CHAP. 3 – PREPARATION (UNPACKING)
CHAP. 1 – GENERAL RULES
ALREADY SOLD MACHINES.
17

Publicité

loading

Ce manuel est également adapté pour:

Bm 108