Emptying The Dust Cup; Important - shark SV1106 N Manuel Du Propriétaire

CARE AND MAINTENANCE • SOINS ET ENTRETIEN • CUIDADO Y MANTENIMIENTO

EMPTYING THE DUST CUP

To maintain the best performance of your vacuum, empty the dust
cup after every use or as debris approaches the "MAX FILL" line.
Never operate the vacuum without the dust cup and filter in place.
1 Turn off the vacuum before removing the dust cup.
2 Press down on the dust cup release button (a) and pull out
the dust cup.
3 Holding the carry handle, place the dust cup inside a trash
receptacle and press the lower dust cup door release button.
Gently tap the dust cup to dislodge and release dust and
debris. (b)
IMPORTANT: If the Dust Cup Door does not swing
open after pressing the release button, push the
door open using the bottom door tabs.
20 1-800-798-7398
a
b
c
4 Snap the door back in place.
5 If you notice hair or other debris wrapped around the metal
screen in the upper chamber of the dust cup, press the upper
dust cup door release to open the top of the dust cup. Lift out
the metal screen, clear any debris and replace. Snap the door
back into place. (c)
6 Replace the dust cup by first seating the lower part of the
dust cup, then pushing in the top part until it clicks. (d)
CAUTION: Remove the unit from the charging stand
before any servicing.
d