shark SV1106 N Manuel Du Propriétaire page 18

USAGE • UTILISATION • USO
USE YOUR CORDLESS VACUUM TO CLEAN BARE
FLOORS, CARPETS AND RUGS.
1 Place your foot lightly on the top of the motorized floor nozzle
and tilt the handle back to release the unit from the locked
upright position. (a)
• Lightly press the power button on the motorized floor
brush with your foot to turn the vacuum on to a high speed
optimized for carpet cleaning (b). On this setting, the
vacuum will run for approximately 12 minutes.
18 1-800-798-7398
a
Carpet
b Tapis
Alfombra
Bare floor
C
Plancher nu
Piso liso
• Press the button again to switch to a lower speed optimized
for bare floor cleaning (c). On this setting the vacuum will
run for approximately 17 minutes. The LED lights around
the power button will indicate your speed.
• Press the button again to turn the unit off.
IMPORTANT: The indicator light around the power button
will flash if the brush roll stops due to a jam. This feature
is designed to protect the Lifetime Belt that powers the
brushroll. See "Restarting After a Jam" on page 24.