Product overview
The device is driven by a compact high-speed micro-electric motor and is designed
for laboratory use. It is ideal for mixing low to medium viscosity liquids, high-
viscosity liquids, and for dispersing particles in shear emulsifying liquid media.
The machine consists of a high-speed motor, shear emulsification working head,
speed controller, and other key components. The drive unit is constructed from
high-quality, die-cast aluminum to ensure stable operation. The working head,
made from refined stainless steel, is designed for a wide range of experimental
applications.
The operating speed is regulated by a microprocessor, which compensates for
sudden speed changes due to overload or voltage fluctuations. This ensures
consistent performance. A built-in soft-start function enhances safety, and the
stepless speed regulation allows you to adjust the speed as needed.
The digital speed display on the SBS-UH-170 model helps you collect accurate
experimental data, while the integrated timer function enables precise control of
operating time during experiments.
Installation
1. Place the base on the platform. Connect the two supporting stands by screwing
them together, then fix them into the mounting hole on the base. Insert the
supporting and fixing frame at the upper end of the supporting stand and turn the
handle to secure it.
2. Attach the short beam to the emulsifying electric motor through the mounting bolt
hole at the back of the motor. Insert the beam into the supporting and fixing frame,
then turn the handle to fasten the motor to the supporting stand. The host motor can
be freely adjusted using the supporting and fixing frame.
Note
•
Before testing or operating the product, carefully read the "Use and
Maintenance" manual.
•
The machine must be installed on a bearing during operation. Handheld use
is prohibited.
Caution
Do not use the product in flammable or explosive environments.
•
Ensure proper grounding of the input power supply socket. Do not connect
•
the grounding wire to telephone lines, metal pipes, or lightning arresters.
•
Never start the machine before placing the shear emulsifying head in the
liquid medium. Ensure that the working head (feed port) is kept at a safe
distance from the bottom of the container.
EN