Publicité
25. The appliance must be disconnected
from the supply mains when removing
the battery.
26. The battery is to be disposed of safely.
FOR HOUSEHOLD AND
COMMERCIAL USE
SAVE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
Nail grinder must be pre-charged fully before using it for the first
time. To start nail grinder, push the POWER button; to stop, push the
POWER button again. To turn on TURBO speed (7,400 RPM), double
click the POWER button; to return to NORMAL speed (6,500 RPM),
double click the POWER button (Figure G).
POWER SUPPLY
This unit is equipped with a universal AC/DC power adapter/battery
charger (Figure A).
1. Remove the power adapter and charger from the carton.
2. Note the charger comes standard with a universal AC voltage power
adapter and three interchangeable plugs (Figures A-D).
3. To attach the desired plug to the power adapter, place the tabs on
the plug inside the slots on the power adapter and slide plug down
until it "clicks" into place. To remove, press the semi-circular button
on the power adapter and slide the plug off. The plugs for the
various countries all attach and remove using the same method
(Figures E & F).
4. Connect the power cord to the back of the nail grinder and then
insert the power adapter into an AC outlet.
7
Publicité
