Télécharger Imprimer la page

Andis CNG-1 Instructions D'utilisation Et D'entretien page 11

Masquer les pouces Voir aussi pour CNG-1:

Publicité

and hold foot securely. Push long hair away from the foot to avoid
tangling or pulling. You can try placing a nylon stocking over the
foot and pushing nails through the nylon to allow easy access to
nails while keeping hair out of the way.
3. Support the toe and nail in one hand while using the nail grinder in
the other hand. This keeps vibrations to a minimum and is more
comfortable for the dog.
4. To get a smooth edge, grind from the bottom of the nail up towards
the tip.
5. Use a continuous side-to-side motion when grinding each nail;
holding the tip in one place too long can cause unevenness and
over-grinding. Do not keep the grinding wheel or stone against
the nail for longer than three seconds at a time.
6. IMPORTANT: Do not apply excessive force when grinding. Let the
speed of the grinder do the work. Do not apply pressure to the nail
with the spinning grinding wheel. Pressure causes the nail to get
hot and will cause pain to the dog.
7. Keep the nail grinder away from the nail when first starting, or the
grinder may "grab" the nail and cause loss of control or injury to the
dog.
USER MAINTENANCE
Cleaning and user maintenance shall not be
made by children without supervision.
The internal mechanism of your nail grinder has been permanently
lubricated at the factory. Other than the recommended maintenance
described in this manual, no other maintenance should be performed,
except by Andis Company or an Andis authorized service station.
CLEANING & MAINTENANCE
• Turn the nail grinder OFF and remove the multi-function protective
cap by twisting counterclockwise to unlock and pulling straight up.
• Brush or blow off dust or other material from nail grinder after each
use.
• Use a soft cloth to wipe off nail grinder.
• Replace grinding attachments when worn.
• Check cords and nail grinder for damage periodically.
11

Publicité

loading