Publicité
Symbols and their meaning
Wireless connectivity power tool with
built-in NFC technology
The N-Mark is a trademark or registered
trademark of NFC Forum, Inc. in the USA
and in other countries.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The machine is intended for driving in and loosening screws
and bolts as well as for tightening and loosening nuts within
the respective range of dimension.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
Tool holder
(1)
(2)
Rubber ring (tool holder)
(3)
Mount for holder
(4)
Rotational direction switch
(5)
Thread for belt clip
a)
(6)
Rechargeable battery
a)
(7)
Battery release button
(8)
User interface
(9)
Position of the built-in NFC antenna
(10) On/off switch
(11) Worklight
(12) Handle (insulated gripping surface)
(13) Application tool (e.g. socket spanner)
(14) Tightening status indicator
a)
(15) Holder
a) This accessory is not part of the standard scope of delivery.
User interface
(16) Temperature alarm indicator
(17) Battery status indicator
(18) Maintenance indicator
(19) "User interface locked" indicator
Bosch Power Tools
(20) Indicator for "soft screwdriving" mode
(21) Button for torque preselection 2
(22) Display for torque preselection
(23) Button for torque preselection 1
Technical Data
Cordless Impact Screw-
driver
Article number
Rated voltage
No-load speed
Impact rate
Max. tightening torque
Max. loosening torque
Number of settings in "Auto-
matic switch-off" mode (user
interface)
Number of settings without
"Automatic switch-off" mode
(user interface)
Machine screw diameter in
"Automatic switch-off" mode
Max. screw diameter without
"Automatic switch-off" mode
Tool holder
B)
Weight
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
ure during operation and dur-
ing storage
Recommended rechargeable
batteries
Recommended battery char-
gers
A) Measured at 20–25 °C with rechargeable battery ProCORE18V
4.0Ah
B) Depends on battery in use
C) Measured at 3 seconds, screw size M20
Values can vary depending on the product, scope of application and
environmental conditions. To find out more, visit
a)
www.bosch-professional.com/wac.
Noise/vibration information
Noise emission values determined according to
EN 62841-2-2.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 101 dB(A); sound power
level 109 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
V=
A)B)
–1
min
A)B)
–1
min
B)C)
Nm
B)C)
Nm
9 (settings 1–9)
mm
mm
kg
°C
°C
1 609 92A 9DD | (27.06.2024)
English | 7
IDS 18V-200 T
3 601 JN0 0..
18
0–2500
0–3500
300
450
1 (setting "H")
M8–M14
M18
1/2"
1.6–2.7
0 to +35
–20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
Publicité
