Publicité
Property classes
Standard screws
according to DIN
3.6
4.6
267
M8
6.57
8.7
M10
13
17.5
M12
22.6
30
M14
36
48
M16
55
73
M18
75
101
Tips
Before screwing larger, longer screws into hard materials, it
is advisable to pre-drill a pilot hole with the core diameter of
the thread to approx. 2/3 of the screw length.
Note: Ensure that no metal particles enter the power tool.
After working at a low speed for an extended period, you
should operate the power tool at the maximum speed for ap-
proximately three minutes without load to cool it down.
Connectivity functions
System Requirements for Using the App
System Requirements
Mobile device (tablet,
smartphone)
Installing and Setting up the App
You will need to install the device-specific app before you
can use the connectivity functions.
– Download the app from the corresponding app store
(Apple App Store, Google Play Store).
Note: You will need to have a user account with the relev-
ant app store to do this.
App name
BeConnected
PRO360
– The display of your mobile device shows you all of the
subsequent steps required to connect the power tool to
the mobile device.
Functions in Conjunction with the Power Tool
In conjunction with the NFC module, the following connectiv-
ity functions are available for the power tool:
– Registration and personalisation
– Status check, output of warning and error messages
– General information and settings
– Management
– Locking the user interface
– Setting the working modes
You can find further information in the Help menu in the app.
Bosch Power Tools
5.6
4.8
6.6
11
11.6
13.1
22
23
26
37.6
40
45
60
65
72
92
98
110
126
135
151
Maintenance and Service
Maintenance and Cleaning
u
u
u
Android 6.0 (and newer)
iOS 11 (and newer)
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
iOS/Android
include the 10‑digit article number given on the nameplate
of the product.
Malaysia
Robert Bosch Sdn. Bhd.(220975-V) PT/SMY
No. 8A, Jalan 13/6
46200 Petaling Jaya
Selangor
Tel.: (03) 79663194
Toll-Free: 1800 880188
Fax: (03) 79583838
E-Mail: kiathoe.chong@my.bosch.com
www.bosch-pt.com.my
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Transport
The recommended lithium-ion batteries are subject to legis-
lation on the transport of dangerous goods. The user can
transport the batteries by road without further require-
ments.
High-strength screws
5.8
6.8
6.9
8.8
14.6
17.5
19.7
23
29
35
39
47
50
60
67
80
79
95
107
130
122
147
165
196
168
202
227
270
Clean the air vents on your power tool regularly. The
motor's fan will draw the dust inside the housing and ex-
cessive accumulation of powdered metal may cause elec-
trical hazards.
Before carrying out any work on the power tool (e.g.
maintenance, tool change etc.), remove the battery
from the power tool. There is risk of injury from uninten-
tionally pressing the on/off switch.
To ensure safe and efficient operation, always keep
the power tool and the ventilation slots clean.
1 609 92A 9DD | (27.06.2024)
English | 13
10.9
12.9
33
39
65
78
113
135
180
215
275
330
380
450
Publicité
