Publicité
10 | English
Display (user interface)
1 609 92A 9DD | (27.06.2024)
Description
The selected setting for torque preselec-
tion is shown on the display for torque
preselection (22).
The indicator for "soft screwdriving"
mode (20) lights up white.
The selected setting for torque preselec-
tion is shown on the display for torque
preselection (22).
The letter "H" appears on the display for
torque preselection (22).
The "User interface locked" indicator (19)
lights up white.
The maintenance indicator (18) lights up
orange.
The battery status indicator (17) lights up
orange.
Meaning
The user interface (8) is switched on.
"Automatic switch-off" mode is switched
on (see "Selecting the working mode",
page 11).
"Soft screwdriving" mode (20) is
switched on (see "Selecting the working
mode", page 11).
"Automatic switch-off" mode is switched
off. (see "Selecting the working mode",
page 11)
The user interface (8) is locked. The but-
tons for torque preselection 1 and
2 ((23)/(21)) are locked. The torque can-
not be changed.
You have 2 options for unlocking the user
interface:
– Via the BeConnected app/PRO360
– By resetting the user interface (8) to
factory settings, if the smartphone or
app is currently unavailable to you.
Hold down the buttons for torque
preselection 1 ((23)) or the button for
torque preselection 2 ((21)) for
6 seconds.
You can then reapply the settings via the
user interface (8).
Scheduled maintenance is due.
Send the power tool to customer ser-
vice (see "After-Sales Service and Applica-
tion Service", page 13) for maintenance.
The battery in the power tool will soon be
empty and will soon need to be replaced
or recharged.
In addition to the display on the user
interface (8), the status indicator screw-
driving process (14) lights up red and an
audio signal sounds.
An insufficiently charged battery will im-
pair the torque of the power tool.
Recharge the battery or replace it with a
fully charged battery.
Bosch Power Tools
Publicité
