Technical Details - WANDERS Olaf Eco Mode D'emploi Et Instructions D'installation

Technical details

Door latch
Nominal capacity*
Fleu collar diameter
Maximum load capacity
* the nominal heat is obtained with a chimney draft of 0,12 mBar
Fuel, wood logs (30 x 10 cm)
Maximum supply capacity
Primary air valve
Secundairy air outlet
Fuel burning period
Flue gas values in accordance with DIN4705, DIN 18895 part 2
Flue gas quantity
Flue gas temperature
Pre-pressure
Efficiency
CO at 13% O
2
Particulate matter
Certificate institute
Test standard
Test report number
Target value for the volume of the space to be heated:
Not all spaces meet the present insulating values. According to DIN 18893, the following values can be
taken for the volume of the space to be heated:
If heating circumstances are favourable:
In less favourable circumstances:
In unfavourable circumstances:
For temporary heating you may assume a reduction of 25% for the volume to be heated if the interval is
more than 8 hours.
28
Olaf Eco
I & II Ba
8 kW
150 mm
3 kg
3 pieces
maximum
maximum
about 1 hour
Olaf Eco
6,4 g/s
0
275 C
0,12 mBar
85,0 %
0,08 %
17 mg/m
1625
EN13240
RRF - 4010 2388
calculate according to DIN 4701
135 m 3
95 m 3
3