Faults - WIKA TC47 Mode D'emploi

5. Commissioning, operation / 6. Faults
Colour coding of thermocouple cable
Thermocouple
Type J
EN
Type K

6. Faults

CAUTION!
Physical injuries and damage to property and the environment
If faults cannot be eliminated by means of the listed measures, the instrument
must be taken out of operation immediately.
▶
▶
▶
For contact details see chapter 1 "General information" or the back page of
the operating instructions.
Faults
No signal
12
Standard
IEC 60584
ASTM E230
DIN 43714
IEC 60584
ASTM E230
Ensure that there is no longer any signal present and protect against being
put into operation accidentally.
Contact the manufacturer.
If a return is needed, please follow the instructions given in chapter 8.2
"Return".
Causes
Sensor break
Positive
Black
Red
Blue
Green
Red
Measures
Replace instrument
WIKA operating instructions, models TC47
Negative
White
White
Red
White
Yellow