Safety Instructions - Renkforce SA-101U Mode D'emploi

4. Safety instructions

The guarantee/warranty will expire if damage is incurred resulting from non-compliance with
these operating instructions. We do not assume any liability for consequential damage!
We do not assume any liability for property damage and personal injury caused by improper
use or non-compliance with the safety instructions. In such cases the guarantee/warranty will
expire!
Dear Customer: The following safety information is intended not only for the protection of the
device but also for the protection of your health. Please read the following items carefully:
• For safety reasons, any unauthorized conversions and/or modifications to the product are not
permitted.
• The design of this product complies with safety class II. Only a standard power socket
(100-240 V/50/60 Hz) of the public mains supply may be used as power supply.
• The mains socket must be close to the device and easily accessible.
• All persons operating, installing, setting up, commissioning or servicing this mixer must be
trained and qualified accordingly and observe these operating instructions.
• Never touch the mains plug with damp or wet hands. There is the risk of a fatal electric shock.
• Do not touch the mains cable if it is damaged. First, power down the respective mains socket
on all poles (e.g. via the respective circuit breaker and FI switch) and then carefully pull the
mains plug from the mains socket. Separate the mains cable from the device and replace it.
Never use the product if the mains cable is damaged.
• This product is not a toy and should be kept out of the reach of children! Children cannot judge
the dangers involved when handling electrical devices.
• Never place containers containing liquids, e.g. glasses, buckets, vases or plants on the device
or in its vicinity. Liquids may get into the housing and impair electrical safety. This also poses
great danger of fire or potentially fatal electric shock! If this is the case, first power down the
respective mains socket on all poles (e.g. switch off circuit breaker and FI switch) and then pull
the mains cable from the socket. Do not operate the product anymore afterwards, but take it to
a specialist workshop.
• Do not expose the device to high temperatures, dripping or splashing water, strong vibrations
or heavy mechanical stress.
• Do not place open sources of fire, such as burning candles, on or directly next to the device.
25