Renkforce SA-101U Mode D'emploi page 29

(7) HEADPHONES channel
Here, the headphones channel is controlled.
MONO SPLIT/STEREO switch
MIXING control
LEVEL control
PHONES connection
(8) Channel fader
Level adjustment of the corresponding channel
(9) MASTER fader
Level adjustment of the master channel
(10) CROSSFADER ASSIGN switches
Selection of the two channels to be controlled by the crossfader (12)
(11) Switch for crossfader control characteristics
Adjustment of the control characteristics of the crossfader (12)
Left position
Right position
(12) Crossfader
Control to crossfade between the channels selected with the CROSSFADER ASSIGN switches (10).
One channel is faded out using the slide control while the other channel is faded in. When the
CROSSFADER is in centre position, both channels are played equally.
(13) MASTER BALANCE control
Control to adjust the volume balance between the left and the right signal of the master channel
(14) Mains connection
Power line connection
(15) MASTER OUT 1 connection
XLR connection for the downstream amplifier
Mono split or stereo playback
in CUE position, only the activated CUE channels are played.
In MASTER position, only the MASTER channel is played.
volume control of the headphones channel
headphones connection
the respective channel is abruptly faded in or out
the respective channel is softly faded in or out
29