Publicité
28 | English
Technical data
Sliding mitre saw
Article number
3 601 M19 161
Rated power input
W
–1
No-load speed
min
Starting current
limitation
Laser type
nm
mW
Laser class
Weight according
kg
to EPTA-Proced-
ure 01:2014
Protection class
Dimensions of suitable saw blades
Saw blade dia-
mm
meter
Base blade thick-
mm
ness
Max. cutting width
mm
Hole diameter
mm
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Permissible workpiece dimensions (see "Permissible workpiece dimensions", page 32)
Values can vary depending upon the product and are subject to application and environmental conditions. For further information
www.bosch-professional.com/wac.
Noise Information
Noise emission values determined according to
EN IEC 62841-3-9.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 99 dB(A); sound power level
112 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
The noise emission value given in these instructions has
been measured in accordance with a standardised measur-
ing procedure and may be used to compare power tools. It
may also be used for a preliminary estimation of noise emis-
sions.
The noise emission value given represents the main applica-
tions of the power tool. However, if the power tool is used
for other applications, with different application tools or is
poorly maintained, the noise emission value may differ. This
may significantly increase noise emissions over the total
working period.
To estimate noise emissions accurately, the times when the
tool is switched off, or when it is running but not actually be-
ing used, should also be taken into account. This may signi-
ficantly reduce noise emissions over the total working
period.
1 609 92A 8L9 | (03.03.2023)
GCM 8 SJL
GCM 8 SJL
3 601 M19 1.. 3 601 M19 1C1 3 601 M19 181
1250
1600
5600
5600
●
●
650
650
< 0.39
< 0.39
1
1
17.3
17.3
/ II
/ II
216
216
1.3–1.8
1.3–1.8
3.3
3.3
30
30
Assembly
u
Items included
Check to ensure that all the parts listed below have been
supplied before using the power tool for the first time:
– Sliding mitre saw with mounted saw blade
– Screw clamp (28)
– Hex key (33)
Note: Check the power tool for possible damage.
Before continuing to use the power tool, carefully check that
all protective devices or slightly damaged parts are working
perfectly and according to specifications. Check that the
moving parts are working perfectly and without jamming;
check whether any parts are damaged. All parts must be fit-
ted correctly and all the conditions necessary to ensure
smooth operation must be met.
GCM 8 SJL
GCM 8 SJL
3 601 M19 1B1
3 601 M19 1K1
1250
1400
5600
5600
●
650
650
< 0.39
< 0.39
1
17.3
17.3
/ II
216
216
1.3–1.8
1.3–1.8
3.3
3.3
25.4
25.4
Avoid starting the power tool unintentionally. The
mains plug must not be connected to the power supply
during assembly or when carrying out any kind of
work on the power tool.
See the list of items included at the start of the
operating manual.
GCM 8 SJL
3 601 M19 141
3 601 M19 1L1
1600
5600
●
●
650
< 0.39
1
1
17.3
/ II
/ II
216
1.3–1.8
3.3
25.4
Bosch Power Tools
Publicité
