Publicité
Symbols and their meaning
The saw blade diameter must match the
information specified on the symbol.
Clamping lever closed:
The adjusted bevel angle of the tool arm
is held in place.
Clamping lever open:
Bevel angles can be adjusted.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is a stationary machine for cutting in a
straight line with and against the grain in hardwood, soft-
wood, chipboard and fibreboard. It is possible to cut mitre
angles of –52° to +60° and bevel angles of –2° to +47°.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.
This product is a consumer laser product in accordance with
EN 50689.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Slide device
Chip ejector
(2)
(3)
Transport handle
(4)
Depth stop adjusting screw
(5)
Laser protection cap
(6)
Guide roller
(7)
Lock-off function for on/off switch
(8)
On/off switch
(9)
Handle
(10)
Protective guard
(11)
Retracting blade guard
(12)
Saw blade
(13)
Saw table extension
(14)
Fence
(15)
Adjustable fence
(16)
Saw table
(17)
Clamping lever of the saw table extension
Bosch Power Tools
(18)
Scale for mitre angles
(19)
Insert plate
(20)
Locking clamp
(21)
Locking knob for various mitre angles
(22)
Mitre pre-setting lever
(23)
Tilt protector
(24)
Angle indicator for mitre angles
(25)
Detents for standard mitre angles
(26)
Mounting holes
(27)
Recessed handles
(28)
Screw clamp
(29)
Standard bevel angle stops 45°, 22.5° and 33.9°
(30)
Chip deflector
(31)
Depth stop
(32)
Locking screw for slide device
(33)
Hex key (5 mm)
(34)
Holes for screw clamp
a)
(35)
Length stop
(36)
Transport safety lock
(37)
Laser warning label
(38)
On/off switch for laser (cutting line indication)
(39)
Clamping lever for all bevel angles
(40)
Scale for bevel angle
(41)
Angle indicator for bevel angles
(42)
Stop for standard 0° bevel angle
(43)
Spindle lock
(44)
Hex socket screw for mounting the saw blade
(45)
Clamping flange
(46)
Inner clamping flange
(47)
Locking screw for the adjustable fence
(48)
Threaded rod
(49)
Laser beam outlet aperture
(50)
Locking screw for length stop
(51)
Clamping screw for length gauge
(52)
Screws for insert plate
(53)
Set screw for laser positioning (parallelism)
(54)
Screw for bevel angle indicator
(55)
Stop screw for 0° bevel angle
(56)
Stop screw for 45° bevel angle
(57)
Screw for mitre angle indicator
(58)
Set screws for mitre angle scale
(59)
Hook-and-loop strap
(60)
Laser lens cover
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
English | 27
a)
a)
1 609 92A 8L9 | (03.03.2023)
Publicité
