Publicité
6
Recording an ECG
US
EN
How to take an ECG recording:
FR
DE
1 - Make sure the Withings
2 - Grab the handle. Hold
SV
Body Scan is on a stable
the handle in both hands,
NL
surface, and that you acti-
taking care that the part of
FI
vated and enabled the ECG
the handle marked with an "L"
DA
measurement in the Withings
is in your left hand and that
IT
app (see "How to enable ECG
the part of the handle marked
ES
Measurement?" section)�
with an "R" is in your right
CS
hand� Make sure both hands
PL
touch the metallic electrodes
PT
on the back of the handle� The
handle should be held with
RO
the cable positioned vertically,
HU
as shown in the figure below�
SK
3 - Step on the scale with
4- Keep your arms along the
bare feet. Make sure your feet
side of your body and relax.
are centered on the scale's
You do not need to grip the
stripes (electrodes)�
handle very tightly�
Recording an ECG
5 - A series of measurements
6 - It takes 30 seconds to
will start depending on
complete a recording.
the configuration you chose
in the application (see page
04 "Using Withings ECG
Monitor with Withings Body
Scan")� You will know that the
ECG measurement has begun
when the ECG recording
screen is displayed on the
scale LCD screen and after
the first vibration� Do not
speak or move during the
ECG recording�
30 sec.
7 - Wait for the measurement
8 - When the measurement is
to end. A countdown
complete you will feel
indicates the remaining time.
a double vibration.
7
US
EN
FR
DE
SV
NL
FI
DA
IT
ES
CS
PL
PT
RO
HU
SK
Publicité
