Publicité
Lower the lift in the lowest position.
•
•
Drive the vehicle from the lift.
•
Raise the lift to approx. 500 mm.
•
Pull the equalization lever 90° upwards and hold it in this position. The
equalization lever is located on the rear side of the aggregate behind the
swiveling cover.
•
Simultaneously press and hold the bridging button on the side.
•
Equalize the rails using the „lifting" and „lowering" buttons.
•
If the rails have reached the same height, release the buttons and pull the
equalization lever in its normal position.
•
Close the cover.
pic 2: Equalization lever
Sniffing line
UNI LIFT 6500 - 8000
Operating instruction and documentation
Equalization lever
- 45 -
UNI-LIFT 6500 - 8000
Version 4.2
Publicité
