5. Operations instructions
The safety regulations must be observed during work with the automotive lift.
Read the safety regulations in chapter 4 carefully before working with the lift!
5.1 Lifting the vehicle
•
Drive vehicle over the lift, longitudinal axes on line of the lift.
The entire standing surface of each wheel must be placed completely on the
ramp, otherwise there is a risk of falling.
•
Block the vehicle against rolling, put into gear, use the parking brake.
•
Check the dangerous places of the lift and be sure that there are no objects
or people in the immediate area of the lift or on the lift.
•
Switch on the control system; main switch on position "1".
•
Raise the lift. Press the button „lifting".
picture 1: power pack
Main switch
Lighting
Pressure regulation
UNI LIFT 6500 - 8000
Operating instruction and documentation
- 43 -
UNI-LIFT 6500 - 8000
Button lifting
Button lowering
Version 4.2