Simons Voss Technologies PinCode keypad AX Guide Abrégé page 36

5. Battery replacement
1. Undo both screws completely from the housing base.
2. Remove the keypad.
3. Align the base plate at the fastening point.
4. Screw/anchor the base plate firmly into position.
5. Put the housing keypad back into position.
6. Screw the keypad back onto the base plate.
9
5. Battery replacement
IMPORTANT
Damage to the electronics due to fluids or static discharge
Do not touch electronics/components; do not allow them to come into
contact with oil, paint, moisture, alkali or acids.
36 / 116
2
3
4
5
PIN code keypad AX is mounted.
PinCode keypad AX
EN