Publicité
@) POWER Switch
Press the POWER switch once to turn power ON, a second
time to turn power OFF.
When
the power
is ON, the
POWER LED above the LED peak meters on the MT10OII
top panel will light. Make sure that the input faders are set
to "0" and the AUX RETURN level control is set to "MIN"
before turning power on.
|
[Note] A muting function operates for five seconds after
power is initially turned on, after which the recorder
can be operated.
Фос IN Jack (DC12V)
The DC output cord from the YAMAHA PA100 AC Adaptor
supplied with the MT100I should be plugged in here. The
AC Adaptor should be plugged into a convenient AC wall
outlet. ` `
Caution: Use only a YAMAHA PA100 AC Power Adaptor
to power your МТ100П.
Other AC adaptors can cause
faulty operation, and may even permanently damage your
MT100II.
Publicité
