THE RECORDING PROCESS
For details pertaining to the operation of MT100II controls, please refer to page 3, "MT100II CONTROLS AND THEIR FUNCTIONS".
Recording with the MT10OII is a very simple process. All you need is the MT100II, a pair of monitor headphones, and an instrument,
microphone, or other signal source.
The multitrack recording process can be basically broken down into the following steps:
1. Record the First Track.
a) Select channel-to-track assignment for input source.
b) Set Record Level.
c) Record.
2. Overdub on the Remaining Tracks.
a) Select channel-to-track assignment for each overdub.
b) Set records level for each overdub.
c) Record the overdub.
'
3. Track Combining.
|
a) If necessary, use "ping pong" technique to combine tracks and clear them for additional overdubs.
4. Mixdown.
a) Set up for monitoring the mix.
b) Set up a rough mix and add effects.
c) Finalize and rehearse the mix.
d) Connect the МТ100П STEREO OUT jacks to a stereo casette recorder.
е) Record
(from the МТ1ООП
to the stereo cassette recorder).
These steps (and what the recording terms mean) will be described in detail below, so its a good idea to read through the following
sections in sequence in order to get a clear picture of the overall recording process.
10
МТ100П MULTITRACK CASSETTE RECORDER
`