Publicité
USING THE TAPE OUT JACKS :
The tape out jacks can be used to feed the tape outputs to an external mixer. In mixdown, individual tracks can be processed using
a signal processor, which receives signal from the TAPE OUT
jack and the output of which is returned to a channel's INPUT
jack.
See diagram.
Processing Individual Tracks In Mixdown Using TAPE OUT Jacks
Signal from track 1 is sent to external signal
processor from TAPE OUT jack 1.
External Processor used for EQ,
compression, gating, pitch chage
or the addition of an effect, such
as delays, flanging etc.
TAPE OUT
=
7
N
INPUT.
INPUT
INPUT
INPUT
\ SET
SELECT
SELECT
TAPE
TAPE
TAPE
| оғ
OFF
OFF
Wei
Mics
Mer
/
чє
LINE
LINE
^
MIC/LINE 1
МТ100П
Signal Processor
OUTPUT
СТТТТТГ 1
MIC/LINE2
MIC/LINE 3 MIC/LINE 4
Signal is returned from signal processor and
connected to MIC/LINE input 1.
INPUT SELECT switch on channel
1is set to MIC/LINE.
19
Publicité
