Publicité
EN
6.2. Error display
In this situation
Nothing displayed.
Scale does not turn on.
The scale does not
display zero at first.
is displayed.
is displayed.
is displayed.
is displayed.
is displayed
and does not proceed.
Fixed display.
6.3. Error code table
When any of the following errors are displayed, try turning the display off and on again.
Display
is displayed
is displayed
is displayed
is displayed
7. Specifications
Models
Weighing Capacity
kg
Readability
Weighing Capacity
g
Readability
Weighing Capacity
lb
Readability
・Is the main power the correct voltage?
・Is the main power cord properly connected?
・Check around the weighing pan.
・Is there anything on the weighing pan?
・Perform zero point sensitivity adjustment.
・Weighing error that meaning "Over loaded."
・Indicates that the sample weight is too light to set the unit weight in
the counting mode.
・Sensitivity adjustment error that meaning "Too light."
・Displayed when the main power drops.
・The weighed value is unstable due to drift, vibration or other factors.
A breeze or vibration may be affecting measurement.
Check around the weighing pan.
・Check the connection of the load cell cable.
・Did you use the "hold function" ?
Change the function
・Turn off scale and turn it on again.
The temperature sensor has failed.
The memory (circuit) has failed.
The internal circuitry has failed.
The mass sensor has failed.
FG-30KCMWP
FG-30KACMWP
30
0.01
0.005 *
0.002
0.001
30000
10
5 *
2
1
66
0.02
0.01 *
0.005
0.002
9
Confirm these items
.
Content
FG-60KCLWP
FG-60KACLWP
60
0.02
0.01 *
0.005
0.002
130
0.05
0.02 *
0.01
0.005
FG-150KCLWP
FG-150KACLWP
150
0.05
0.02 *
0.01
0.005
330
0.1
0.05 *
0.02
0.01
Publicité
