Publicité
EN
Display/symbol
STABLE 〇
NET
ZERO
Weighing Units
□ For details on the method of operation and various functions, refer to the FG-CWP/FG-ACWP
Series Instruction Manual on our website
□ However, please note that functions related to USB and mobile battery cannot be used with
FG-ACWP Series (AC power model).
4.2. Operation Keys
Operation key
ON/OFF Key
Shows or hides the display.
Note: When the power plug of the scale is connected, power is supplied to
the electric circuits inside the scale.
SAMPLE Key
Selecting "pcs" as the unit activates individual weight setting mode.
Pressing and holding (for about 2 seconds) activates the comparator
threshold setting mode
PRINT Key
Outputs the weighed value as data.
Increases the value of the digit flashing when setting.
MODE Key
Switches the weighing unit.
Shifts to the right the digit flashing when making settings.
ZERO Key
Based on the zero point weighed at the time of turning on the display, by
pressing the ZERO key when the weight value is stable within ±2% of the
weighing capacity, the zero point indicator turns on as soon as the display
becomes zero.
This is lit when the weighing value is stable, indicating that the scale is in
the proper condition for reading weighing values.
This is lit when weight of the container (tare) is subtracted.
This is lit when the scale is at the zero point (reference point for weighing).
" kg", " g", " pcs", " oz" and "lb " is lit.
Note: " g" is only used with the FG-30KCMWP/FG-30KACMWP.
This is lit when the display is held.
This is a function to detect impact to the mass sensor section and to
display the impact level.
Lights up when successfully connected to the optional FG-27CWP
(Bluetooth communication interface).
While the comparator function is being used, the weighing value is
compared using the preset threshold values and the indicator displays the
result.
Alternating current.
Earth (ground) Terminal.
Description
https://www.aandd.jp.
Description
7
Publicité
