Publicité
when outdoor temperatures are warm. Be sure to regulate the sensitivity
of the sensor over the course of the year.
Setting the daylight level
Turn the rotary control LUX
position, the motion detector only reacts at night (at approx. 10 lx).
In the
position, the motion detector also responds at daylight levels,
as long as about 20,000 lx are not exceeded.
Aligning the motion detector
Note: Perform this adjustment at twilight.
Slacken the locking screw
Turn the rotary control LUX
Align the motion detector
coverage area.
Move about through the coverage area until you are satisfied with the
response characteristics of the motion detector
orientation, change the position of the rotary control SENS
orientation of the motion detector
Note: Please note that the motion detector
ments transverse to the motion detector
the motion detector
When you have aligned the motion detector
the fastening screws
Turn the rotary control LUX
termined during the dawn or twilight hours during which the spotlight
should respond.
Slowly turn the rotary control LUX
ment within the coverage area.
12 GB/IE/NI
to increase the daylight level: In the
12
.
8
to position
12
into the central region of the desired
9
.
9
, it cannot detect this movement.
9
to fix the adjustment.
8
to the desired position. This can be de-
12
12
.
. To find the proper
9
primarily detects move-
9
. If you move directly towards
9
satisfactorily, re-tighten
9
clockwise until it reacts to move-
or the
10
1
Publicité
