Cleanmaxx CP-CY4503ES-2 Mode D'emploi page 20

EN
Do not subject the device to extreme temperatures, severe
■
changes in temperatures, open fl ames, direct sunlight, moisture
or wetness.
Do not allow the device to fall and do not subject it to strong
■
impacts.
Never place heavy objects on the device.
■
Do not use the device in water or other liquids in order to avoid
■
the risk of electrical shock. Do not fi ll the dust container with
liquids.
Never touch the device, the mains cable or the mains plug with
■
wet hands.
Do not insert anything in the device openings/nozzles and en-
■
sure that they are not clogged.
Never leave the device unattended when switched on or when
■
connected to a power supply.
Turn the device off and pull the mains plug out of the socket
■
– if you interrupt using the device,
– if you are fi nished using the device,
– before you change the accessories,
– if an error or fault occurs during operation,
– if liquids or foreign debris have got into the device,
– before a storm,
– before you clean the device parts and accessories.
The device must be switched off when you pull the mains plug
■
out of the socket or insert it in the socket.
If you wish to remove the mains plug from the socket, never pull
■
on the mains cable, but always on the plug!
Never move the device by pulling it by the mains cable. Use the
■
handle.
Do not attempt to grease the wheels with lubricants or oil. Oth-
■
erwise, this may cause more dust or dirt to accumulate on the
wheels.
Keep an eye on the dust container's MAX mark. If the mark has
■
been reached during use, empty the dust container before you
continue vacuuming.
20