Input Of Ovulation Symptoms; Data Recall - uebe cyclotest 2 plus Mode D'emploi

Operating the unit

Input of ovulation symptoms

Note: The input stands either for cervical mucus or for LH concentra-
tion and must be made on the same day of the event.
1. Press and hold down the small round Start button. "01" appears.
2. Straight afterwards press the large round Measurement button
until "CY" appears on the right in the display.
3. Now release the Start button and keep the Measurement button
pressed until the input is confirmed with a beep.
Please note! If you hold down the Start button for too long without
pressing the Measurement button, a new cycle will be started.
It is only possible to input LH or cervical mucus information on the
middle days of a cycle.
cyclotest® 2 plus makes no distinction between whether you are
observing the LH concentration or cervical mucus. You can only input
one of the two. We recommend that you use the cyclotest® Ovulation
Test (Art. Nr. 9035, PZN 01399381) to identify the ovulation hormone.
EN-68
Fig. no. 19
Your display now looks like this.
Operating the unit

Data recall

cyclotest® 2 plus stores detailed data for the current cycle and the
previous cycle and the key data from the last 12 cycles in the cycle
overview.
Recall of detailed data in the current and previous cycles (unit is
switched off):
Briefly press the right Arrow button once. The current cycle day
appears:
Press the left Arrow button repeatedly. The previous days appear. You
can scroll back in the current and previous cycles to the respective
cycle start.
Display examples:
......................... .... Ich bin mir sicher.
Fig. no. 20
Fig. no. 21
DAY NEW: current cycle
Fig. no. 22
DAY OLD: previous cycle
EN-69