Publicité
– If you hold down the ON button
candles will go into flickering mode.
You can revert back to continuous light at any time by briefly pressing
the ON button
Using the 6H button
– Use the ON button
or flickering mode.
– Then press the 6H button
off after 6 hours.
Using the + / - button
ness when candles are in constant mode.
Use the RGB button
the candles
back to normal continuous light at any time by briefly pressing the
ON button
Turn the candles off using the OFF button
ATTENTION!
If individual candles
check the orientation of the candles
To ensure perfect operation it is important that there is "visual con-
tact" between all candles
Observe the different lengths you have to hold down the ON
button
according to your desired light mode (see above).
7
7
you can switch the candles to 6 hour mode:
9
to switch the candles to either constant
7
. The candles will turn themselves
9
you can increase or decrease the bright-
8
to switch to the RGB feature. The light of
11
will now constantly change colour. You can switch
1
.
7
do not turn on or off or will not change mode,
1
1
for approx. 3 seconds, the
7
.
10
and the remote control
1
and the remote control
.
6
.
6
GB/IE/NI
13
Publicité
